Jeep Grand Cherokee EcoDiesel 3.0L – Bench-Flash Delete Tuning (2014-2019)

We are offering a bench-flash delete-tune for 2014, 2015, 2016, 2017, 2018, and 2019 Jeep Grand Cherokee EcoDiesel 3.0L to disable EGR/DPF-related codes for off-road and race use. We will cover shipping both ways, we will send you a shipping label to get your ECM to us and we will ship it back, the shipping price is covered but any additional broker fees are not covered although those are very rare. The process requires you to remove your PCM/ECU (or have it professionally removed) and ship it to us. After we receive your PCM it will take 3-5 business days for us to receive it, inspect it, flash it, and ship it back. We will ship it back with express shipping and delivery time should be 2-3 business days.

Tune Levels:

• Economy = Stock power levels, Emissions OFF
• Stock Plus = +30 HP, Emissions OFF
• Race = +50 HP, Emissions OFF
• Max = +75 HP, Emissions OFF

*We cannot tune over an existing tune, if your PCM was previously tuned it will need to be reverted back to stock before a new tune can be used.*

You will require a DPF/DEF Race/Delete Pipe

Before removing your ECM take note of any maintenance or engine lights on the dash. You should have no errors before removing the ECM. If you have a DEF/DPF countdown issues prior to tuning, those should be cleared. Since those are transmitted by the SCR module it will stay in the cluster and an ECU tune unfortunately does not typically clear those codes. Be sure your codes are all cleared before you remove the ECM.

1. Clear all codes.
2. Turn the key to the off position.
3. Remove the negative cable from the battery.
4. Remove ECM.

*This is a special-order item and is exempt from returns/refunds*